Search for: All records

SUMMARY The high cost of active surveys and the scarcity of underwater instruments hinder the availability of seismic imaging in oceanic environments. Ocean-bottom Distributed Acoustic Sensing (OBDAS) utilizing existing telecommunicational infrastructure is an alternative and economical approach to illuminate the subsurface at unprecedented resolution and over distances of tens of kilometers. In this study, we utilize OBDAS data along a 60-km cable perpendicular to the coast of Oregon to image the continental shelf subsurface. We extract landward and seaward surface waves via cross-correlation and coherent stacking of the ambient seismic field. To stably measure dispersions of both the fundamental modes and higher overtones, we apply a double-beamforming (DBF) workflow across different array subsections in the 0.2–3 Hz band with a spatial averaging technique. We perform a perturbational-based inversion scheme to reliably invert for S-wave velocities over the first 2000 m of the subsurface underlying the fiber-optic cable. By comparing our results with the 1-D slant-stack approach, we demonstrate the applicability of the DBF method on the OBDAS data set and the enhanced spatial resolution of this approach. From our single-mode DBF results, we observe a coherent layering feature in the Florence shelf-sea region, while multimode DBF results reveal possibly smaller-scale heterogeneity in the study region. 

Abstract The origin of microseisms—whether from deep‐ocean sources or coastal reflections—has been debated for decades. In this study, we use Distributed Acoustic Sensing (DAS) and Ocean Bottom Seismometer data collected offshore Oregon to investigate microseisms sources across a range of frequency bands. Our results reveal a clear frequency dependence: high‐frequency (0.35–1.5 Hz) microseisms primarily originates near the coastline due to wind ocean waves, with minimal contribution from the deep ocean. In short‐period double frequency (SPDF, 0.2–0.35 Hz) microseisms, the source regions extend farther offshore and are increasingly influenced by deep‐ocean sources. Long‐period double frequency (LPDF, 0.1–0.2 Hz) microseisms are predominantly generated in the deep ocean. Furthermore, we find that microseisms generated by coastal reflections do not propagate into the deep ocean. 

Abstract The use of fiber-optic sensing systems in seismology has exploded in the past decade. Despite an ever-growing library of ground-breaking studies, questions remain about the potential of fiber-optic sensing technologies as tools for advancing if not revolutionizing earthquake-hazards-related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber-optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber-optic sensing to impact monitoring efforts by documenting the data completeness in a number of long-term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber-optic sensing and unlock its potential application to a broad range of earthquake hazard problems. 

Abstract Distributed Acoustic Sensing (DAS) offers a transformative solution for dense, high‐resolution seismic monitoring to address the challenges of traditional seismometers in urban seismic surveys. Here, we employ seismic interferometry of the ambient noise field and the trace stretching method to monitor seismic velocity variations in Mexico City. We present spatiotemporal variations in relative Rayleigh wave group velocity calculated over two frequency bands (0.4–1.2 Hz and 1.2–3.6 Hz) using DAS data collected over a year. To investigate these variations, we model the impacts resulting from the 2022 Mw7.6 earthquake, along with the effects of precipitation and temperature on the calculated in the 0.4–1.2 Hz frequency band, which is primarily dominated by the fundamental mode of the Rayleigh waves. Our results indicate that the earthquake‐induced velocity drop differs in certain fiber sections, likely due to their non‐linear soil behaviors and co‐seismic stress changes but without relation to the maximum local deformation registered during the earthquake. Additionally, our modeling indicates that the velocity changes are influenced by seasonal temperature variations, and the impact of precipitation is relatively minor, at least for the depth range (50 m) examined in this study. This study highlights the capability of DAS to enhance spatiotemporal monitoring in urban environments, providing valuable insights into both seismic and environmental responses. 

Continuous monitoring of volcanic gas emissions is crucial for understanding volcanic activity and potential eruptions. However, emissions of volcanic gases underwater are infrequently studied or quantified. This study explores the potential of Distributed Acoustic Sensing (DAS) technology to monitor underwater volcanic degassing. DAS converts fiber-optic cables into high-resolution vibration recording arrays, providing measurements at unprecedented spatio-temporal resolution. We conducted an experiment at Laacher See volcano in Germany, immersing a fiber-optic cable in the lake and interrogating it with a DAS system. We detected and analyzed numerous acoustic signals that we associated with bubble emissions in different lake areas. Three types of text-book bubbles exhibiting characteristic waveforms are all found from our detections, indicating different nucleation processes and bubble sizes. Using clustering algorithms, we classified bubble events into four distinct clusters based on their temporal and spectral characteristics. The temporal distribution of the events provided insights into the evolution of gas seepage patterns. This technology has the potential to revolutionize underwater degassing monitoring and provide valuable information for studying volcanic processes and estimating gas emissions. Furthermore, DAS can be applied to other applications, such as monitoring underwater carbon capture and storage operations or methane leaks associated with climate change. 

SUMMARY Ocean bottom distributed acoustic sensing (OBDAS) is emerging as a new measurement method providing dense, high-fidelity and broad-band seismic observations from fibre-optic cables deployed offshore. In this study, we focus on 35.7 km of a linear telecommunication cable located offshore the Sanriku region, Japan, and apply seismic interferometry to obtain a high-resolution 2-D shear wave velocity (VS) model below the cable. We first show that the processing steps applied to 13 d of continuous data prior to computing cross-correlation functions (CCFs) impact the modal content of surface waves. Continuous data pre-processed with 1-bit normalization allow us to retrieve dispersion images with high Scholte-wave energy between 0.5 and 5 Hz, whereas spatial aliasing dominates dispersion images above 3 Hz for non-1-bit CCFs. Moreover, the number of receiver channels considered to compute dispersion images also greatly affects the resolution of extracted surface-wave modes. To better understand the remarkably rich modal nature of OBDAS data (i.e. up to 30 higher modes in some regions), we simulate Scholte-wave dispersion curves for stepwise linear VS gradient media. For soft marine sediments, simulations confirm that a large number of modes can be generated in gradient media. Based on pre-processing and theoretical considerations, we extract surface wave dispersion curves from 1-bit CCFs spanning over 400 channels (i.e. ∼2 km) along the array and invert them to image the subsurface. The 2-D velocity profile generally exhibits slow shear wave velocities near the ocean floor that gradually increase with depth. Lateral variations are also observed. Flat bathymetry regions, where sediments tend to accumulate, reveal a larger number of Scholte-wave modes and lower shallow velocity layers than regions with steeper bathymetry. We also compare and discuss the velocity model with that from a previous study and finally discuss the combined effect of bathymetry and shallow VS layers on earthquake wavefields. Our results provide new constraints on the shallow submarine structure in the area and further demonstrate the potential of OBDAS for high-resolution offshore geophysical prospecting. 

Abstract During the past few years, distributed acoustic sensing (DAS) has become an invaluable tool for recording high-fidelity seismic wavefields with great spatiotemporal resolutions. However, the considerable amount of data generated during DAS experiments limits their distribution with the broader scientific community. Such a bottleneck inherently slows down the pursuit of new scientific discoveries in geosciences. Here, we introduce PubDAS—the first large-scale open-source repository where several DAS datasets from multiple experiments are publicly shared. PubDAS currently hosts eight datasets covering a variety of geological settings (e.g., urban centers, underground mines, and seafloor), spanning from several days to several years, offering both continuous and triggered active source recordings, and totaling up to ∼90 TB of data. This article describes these datasets, their metadata, and how to access and download them. Some of these datasets have only been shallowly explored, leaving the door open for new discoveries in Earth sciences and beyond. 

Abstract Seismicity during explosive volcanic eruptions remains challenging to observe through the eruptive noise, leaving first‐order questions unanswered. How do earthquake rates change as eruptions progress, and what is their relationship to the opening and closing of the eruptive vent? To address these questions for the Okmok Volcano 2008 explosive eruption, Volcano Explosivity Index 4, we utilized modern detection methods to enhance the existing earthquake catalog. Our enhanced catalog detected significantly more earthquakes than traditional methods. We located, relocated, determined magnitudes and classified all events within this catalog. Our analysis reveals distinct behaviors for long‐period (LP) and volcano‐tectonic (VT) earthquakes, providing insights into the opening and closing cycle. LP earthquakes occur as bursts beneath the eruptive vent and do not coincide in time with the plumes, indicating their relationship to an eruptive process that occurs at a high pressurization state, that is, partially closed conduit. In contrast, VT earthquakes maintain a steadier rate over a broader region, do not track the caldera deflation and have a largerb‐value during the eruption than before or after. The closing sequence is marked by a burst of LPs followed by small VTs south of the volcano. The opening sequence differs as only VTs extend to depth and migrate within minutes of the eruption onset. Our high‐resolution catalog offers valuable insights, demonstrating that volcanic conduits can transition between partially closed (clogged) and open (cracked) states during an eruption. Utilizing modern earthquake processing techniques enables clearer understanding of eruptions and holds promise for studying other volcanic events. 

Abstract During February 2023, a total of 32 individual distributed acoustic sensing (DAS) systems acted jointly as a global seismic monitoring network. The aim of this Global DAS Month campaign was to coordinate a diverse network of organizations, instruments, and file formats to gain knowledge and move toward the next generation of earthquake monitoring networks. During this campaign, 156 earthquakes of magnitude 5 or larger were reported by the U.S. Geological Survey and contributors shared data for 60 min after each event’s origin time. Participating systems represent a variety of manufacturers, a range of recording parameters, and varying cable emplacement settings (e.g., shallow burial, borehole, subaqueous, and dark fiber). Monitored cable lengths vary between 152 and 120,129 m, with channel spacing between 1 and 49 m. The data has a total size of 6.8 TB, and are available for free download. Organizing and executing the Global DAS Month has produced a unique dataset for further exploration and highlighted areas of further development for the seismological community to address.